# text: "Sorry, ZipIt was unable to open that file. Are you sure it is a valid zip archive? You may need to download it again in binary mode, or tell the person who created it that it is an invalid file."
# item 2: TEXT (0x88) disabled
# bounds: x1=14 y1=77 x2=329 y2=124
# text: "Also, if this is one part of a multi-segment archive, you must open the final segment in order for ZipIt to read the archive."
# item 3: TEXT (0x88) disabled
# bounds: x1=14 y1=133 x2=330 y2=166
# text: "Please consult the “Troubleshooting” section in the documentation for more information."
DITL_129.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=134 y1=111 x2=192 y2=131
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "^0"
DITL_130.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=110 x2=208 y2=130
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=14 y1=14 x2=310 y2=104
# text: "Sorry, the following error occurred:\n^0\nError code = ^1"
DITL_131.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=89 y1=75 x2=147 y2=95
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=238 y1=75 x2=296 y2=95
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=70 y1=14 x2=311 y2=60
# text: "^0"
DITL_132.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=134 y1=111 x2=192 y2=131
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "Sorry, you cannot change the compression of an item already saved. Uncompress it and then recompress it if necessary."
DITL_133.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=100 x2=338 y2=120
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=30 y1=100 x2=88 y2=120
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=5 y1=3 x2=256 y2=36
# text: "^0"
# item 3: TEXT (0x88) disabled
# bounds: x1=20 y1=37 x2=371 y2=54
# text: "Rename ^1 as:"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=60 x2=373 y2=76
# text: ""
# item 5: BUTTON (0x04) enabled
# bounds: x1=133 y1=98 x2=208 y2=118
# text: "Cancel All"
# item 6: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010085
DITL_134.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=63 x2=392 y2=83
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=223 y1=63 x2=301 y2=83
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=78 y1=62 x2=156 y2=82
# text: "Don’t save"
# item 3: ICON (0xA0) disabled
# bounds: x1=23 y1=13 x2=55 y2=45
# ICON resource ID: 2
# item 4: TEXT (0x88) disabled
# bounds: x1=78 y1=13 x2=393 y2=49
# text: "Save changes to the zip file “^0” before closing?"
DITL_135.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=360 y1=220 x2=418 y2=240
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=70 y1=220 x2=128 y2=240
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=20 y1=10 x2=443 y2=30
# data: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=6 y1=41 x2=487 y2=212
# text: ""
DITL_136.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=357 y1=142 x2=415 y2=162
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=57 y1=142 x2=115 y2=162
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=10 y1=10 x2=435 y2=30
# data: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=10 y1=40 x2=462 y2=127
# text: ""
DITL_137.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=310 y1=291 x2=368 y2=311
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=50 y1=291 x2=108 y2=311
# text: "Cancel"
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=10 x2=436 y2=30
# text: "Do not put up notification dialog boxes while in background"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=31 x2=358 y2=51
# text: "Open an untitled window when first starting up"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=73 x2=371 y2=93
# text: "By default, smart-strip linefeeds from text files"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=259 y1=230 x2=300 y2=247
# text: ""
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=259 y1=250 x2=300 y2=267
# text: ""
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=259 y1=270 x2=300 y2=287
# text: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=119 y1=230 x2=228 y2=249
# text: "Binary file type:"
# item 9: TEXT (0x88) disabled
# bounds: x1=119 y1=250 x2=247 y2=268
# text: "Binary file creator:"
# item 10: TEXT (0x88) disabled
# bounds: x1=119 y1=270 x2=234 y2=286
# text: "Text file creator:"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=52 x2=316 y2=72
# text: "Always replace existing files; do not ask"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=94 x2=217 y2=114
# text: "Allow duplicate filenames"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=115 x2=359 y2=133
# text: "Convert all filenames to PC-compatible format"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=136 x2=239 y2=154
# text: "Enable zoom rectangles"
# item 15: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010089
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=156 x2=263 y2=174
# text: "Follow aliases when adding files"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=176 x2=301 y2=194
# text: "Rename floppy disks when segmenting"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=196 x2=382 y2=215
# text: "Self-extracting archives should unzip to a new folder"
DITL_138.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=110 x2=208 y2=130
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=310 y2=102
# text: "Error occured while zipping:\n^0\n^1\nError code: ^2"
DITL_139.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=291 y1=303 x2=367 y2=323
# text: "Register"
# item 1: BUTTON (0x04) enabled
# bounds: x1=131 y1=303 x2=265 y2=324
# text: "Register Online..."
# item 2: BUTTON (0x04) enabled
# bounds: x1=31 y1=303 x2=102 y2=323
# text: "Not yet"
# item 3: PICTURE (0xC0) disabled
# bounds: x1=1 y1=6 x2=262 y2=127
# PICT resource ID: 130
# item 4: TEXT (0x88) disabled
# bounds: x1=10 y1=230 x2=85 y2=246
# text: "Name:"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=275 x2=85 y2=291
# text: "Password:"
# item 6: EDIT_TEXT (0x90) disabled
# bounds: x1=108 y1=230 x2=270 y2=247
# text: ""
# item 7: EDIT_TEXT (0x90) disabled
# bounds: x1=108 y1=254 x2=270 y2=271
# text: ""
# item 8: EDIT_TEXT (0x90) disabled
# bounds: x1=108 y1=278 x2=270 y2=295
# text: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=252 x2=103 y2=268
# text: "Organization:"
# item 10: PICTURE (0xC0) disabled
# bounds: x1=130 y1=94 x2=320 y2=210
# PICT resource ID: 134
DITL_140.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=180 y1=140 x2=238 y2=160
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=140 x2=78 y2=160
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=20 y1=10 x2=333 y2=28
# text: "Please enter a password for ^0:"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=40 x2=238 y2=58
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=20 y1=70 x2=335 y2=87
# text: "Please reenter your password for verification:"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=100 x2=238 y2=118
# text: ""
DITL_141.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=230 y1=80 x2=288 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=80 x2=78 y2=100
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=329 y2=28
# text: "Please enter the password for ^0:"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=10 y1=40 x2=313 y2=57
# text: ""
DITL_142.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=290 y1=260 x2=348 y2=280
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=80 y1=260 x2=138 y2=280
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=31 y1=20 x2=148 y2=41
# text: "Archive file type:"
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=20 x2=314 y2=39
# text: "ZIP (recommended)"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=40 x2=206 y2=58
# text: "TEXT"
# item 5: TEXT (0x88) disabled
# bounds: x1=44 y1=70 x2=148 y2=88
# text: "Use MacBinary:"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=70 x2=256 y2=88
# text: "Always"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=90 x2=256 y2=108
# text: "When needed"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=110 x2=256 y2=128
# text: "Never"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=142 x2=292 y2=160
# text: "Deflation (better)"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=162 x2=364 y2=180
# text: "Implosion (more compatible)"
# item 11: TEXT (0x88) disabled
# bounds: x1=6 y1=142 x2=148 y2=163
# text: "Default compression:"
# item 12: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001008E
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=190 x2=328 y2=207
# text: "Pretend to be Unix zip"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=210 x2=307 y2=227
# text: "Pretend to be PKZip"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=230 x2=405 y2=248
# text: "Zip files are marked created by ZipIt"
# item 16: TEXT (0x88) disabled
# bounds: x1=40 y1=190 x2=146 y2=209
# text: "Zip file marking:"
DITL_143.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=21 y1=91 x2=79 y2=111
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=112 y1=91 x2=170 y2=111
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=14 y1=14 x2=160 y2=32
# text: "Name of new folder:"
# item 3: EDIT_TEXT (0x90) disabled
# bounds: x1=14 y1=42 x2=164 y2=58
# text: ""
DITL_144.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=180 x2=318 y2=200
# text: "Add"
# item 1: BUTTON (0x04) enabled
# bounds: x1=375 y1=180 x2=433 y2=200
# text: "Delete"
# item 2: TEXT (0x88) disabled
# bounds: x1=245 y1=14 x2=319 y2=30
# text: "Extension:"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=328 y1=14 x2=382 y2=30
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=259 y1=77 x2=318 y2=93
# text: "Creator:"
# item 5: CUSTOM (0x80) disabled
# bounds: x1=244 y1=130 x2=453 y2=145
# data: ""
# item 6: BUTTON (0x04) enabled
# bounds: x1=275 y1=150 x2=406 y2=170
# text: "Choose example…"
# item 7: CUSTOM (0x00) enabled
# bounds: x1=7 y1=7 x2=235 y2=194
# data: ""
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=328 y1=45 x2=382 y2=61
# text: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=392 y1=42 x2=412 y2=58
# data: ""
# item 10: TEXT (0x88) disabled
# bounds: x1=252 y1=44 x2=319 y2=61
# text: "File type:"
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=328 y1=76 x2=382 y2=92
# text: ""
# item 12: CUSTOM (0x00) enabled
# bounds: x1=392 y1=73 x2=412 y2=89
# data: ""
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=262 y1=104 x2=339 y2=121
# text: "Text file"
# item 14: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010090
DITL_145.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=134 y1=111 x2=192 y2=131
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "There are too many letters in that field. The extension can have a maximum of three letters, and the file type and creator a maximum of four."
DITL_146.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=50 y1=160 x2=207 y2=180
# text: "I have my password…"
# item 1: BUTTON (0x04) enabled
# bounds: x1=60 y1=190 x2=197 y2=210
# text: "Print order form…"
# item 2: BUTTON (0x04) enabled
# bounds: x1=100 y1=130 x2=158 y2=150
# text: "Not yet"
# item 3: BUTTON (0x04) enabled
# bounds: x1=40 y1=220 x2=206 y2=240
# text: "Register via Internet…"
# item 4: PICTURE (0xC0) disabled
# bounds: x1=270 y1=0 x2=513 y2=202
# PICT resource ID: 132
# item 5: PICTURE (0xC0) disabled
# bounds: x1=10 y1=0 x2=271 y2=121
# PICT resource ID: 130
DITL_147.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=224 y1=77 x2=290 y2=97
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=140 y1=77 x2=198 y2=97
# text: "Stop"
# item 2: TEXT (0x88) disabled
# bounds: x1=63 y1=7 x2=295 y2=68
# text: "The file “^0” may not be valid. Please use it with caution."
DITL_148.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=110 x2=198 y2=130
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=14 y1=14 x2=316 y2=100
# text: "ZipIt cannot open the selected file. If this is a multi-segment archive, please open the final segment. Otherwise, you probably need to re-download the archive in binary mode. See the documentation for details."
DITL_149.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=150 x2=208 y2=170
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=340 y2=47
# text: "Sorry, you may not modify existing entries in a multi-segment zip archive."
# item 2: TEXT (0x88) disabled
# bounds: x1=60 y1=50 x2=338 y2=138
# text: "Instead, use the “Save As…” command to save this archive to your hard disk, then make your changes. You may then use the “Save As…” command again to re-segment the archive."
DITL_150.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=130 y1=160 x2=188 y2=180
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=9 x2=301 y2=88
# text: "There is no more space on the selected disk. If you would like to segment the archive, please choose “Set Segment Size” from the Zip menu."
# item 2: TEXT (0x88) disabled
# bounds: x1=60 y1=100 x2=309 y2=152
# text: "If you have already tried this, you should probably set the segment size to a lower value and try again."
DITL_151.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=154 y1=140 x2=212 y2=160
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=21 y1=140 x2=79 y2=160
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=48 y1=115 x2=96 y2=131
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=100 y1=115 x2=117 y2=129
# text: "K"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=14 x2=267 y2=33
# text: "As large as possible"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=35 x2=217 y2=53
# text: "High Density (1390K)"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=55 x2=217 y2=73
# text: "DOS double density (650K)"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=75 x2=224 y2=92
# text: "Mac double density (775K)"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=95 x2=217 y2=113
# text: "Mac single sided (385K)"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=28 y1=115 x2=47 y2=133
# text: ""
DITL_152.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=210 y1=91 x2=268 y2=111
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=35 y1=91 x2=93 y2=111
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=14 y1=14 x2=46 y2=46
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=63 y1=14 x2=285 y2=81
# text: "You must use InternetConfig to modify your extension mapping preferences. Should I launch InternetConfig now?"
DITL_153.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=280 x2=258 y2=300
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=16 y1=8 x2=409 y2=58
# text: "Your SoftLock ID has changed, meaning that you have either reformatted your hard disk or switched computers. Your password was based on your SoftLock ID."
# item 2: TEXT (0x88) disabled
# bounds: x1=16 y1=64 x2=410 y2=118
# text: "Please email zipit@softlock.com, consult the web page (http://www.awa.com/softlock/zipit/zipit.html), or call 800-SOFTLOCK, with the following information:"
# text: "You will be given a new password to register ZipIt."
# item 5: TEXT (0x88) disabled
# bounds: x1=16 y1=208 x2=405 y2=262
# text: "This message will only appear ONCE, so please write down the information. Also, this is a one-time change: your SoftLock ID will never change again."
DITL_154.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=184 y1=104 x2=242 y2=124
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=48 y1=104 x2=106 y2=124
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=128 y1=64 x2=147 y2=80
# text: "5"
# item 3: TEXT (0x88) disabled
# bounds: x1=24 y1=16 x2=257 y2=50
# text: "Choose a compression level, from 0 (fastest) to 9 (best):"
DITL_155.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=216 y1=96 x2=274 y2=116
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=56 y1=96 x2=114 y2=116
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=32 y1=8 x2=306 y2=27
# text: "Please personalize your copy of ZipIt:"
# item 3: TEXT (0x88) disabled
# bounds: x1=32 y1=40 x2=107 y2=56
# text: "Name:"
# item 4: TEXT (0x88) disabled
# bounds: x1=32 y1=64 x2=123 y2=80
# text: "Organization:"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=136 y1=40 x2=326 y2=56
# text: ""
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=136 y1=64 x2=326 y2=80
# text: ""
DITL_156.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=216 y1=136 x2=274 y2=156
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=56 y1=136 x2=114 y2=156
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=288 y1=136 x2=346 y2=156
# text: "No"
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=352 y2=91
# text: "I have just one question, and then I will start your web browser to allow you to register ZipIt over the Internet. If you do not want me to open your web browser, click “Cancel.”"
# item 4: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
# item 5: TEXT (0x88) disabled
# bounds: x1=56 y1=104 x2=352 y2=123
# text: "Do you live in the United States or Canada?"
DITL_157.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=80 y1=80 x2=138 y2=100
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=330 y1=80 x2=388 y2=100
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=210 y1=80 x2=268 y2=100
# text: "No"
# item 3: TEXT (0x88) disabled
# bounds: x1=70 y1=14 x2=442 y2=74
# text: "^0"
DITL_158.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=320 y1=240 x2=378 y2=260
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=60 y1=240 x2=118 y2=260
# text: "No"
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=80 y1=270 x2=310 y2=288
# text: "and don’t show this dialog again"
# item 3: TEXT (0x88) disabled
# bounds: x1=60 y1=20 x2=382 y2=76
# text: "This file appears to be a Macintosh-only file. If you zip it without using MacBinary encoding, it may be unusable after you unzip it."
# item 4: TEXT (0x88) disabled
# bounds: x1=60 y1=80 x2=383 y2=147
# text: "You should NOT use MacBinary if you intend to unzip this file on a non-Macintosh computer. Files zipped using MacBinary will only be usable if unzipped with ZipIt."
# item 5: TEXT (0x88) disabled
# bounds: x1=60 y1=210 x2=382 y2=232
# text: "Do you want to zip this file using MacBinary?"
# item 6: TEXT (0x88) disabled
# bounds: x1=60 y1=150 x2=384 y2=200
# text: "You may also want to adjust the preference “Use MacBinary,” found in File\x1APreferences\x1ACompression."
# item 7: ICON (0xA0) disabled
# bounds: x1=20 y1=20 x2=52 y2=52
# ICON resource ID: 2
DITL_200.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=161 x2=332 y2=181
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=130 x2=332 y2=150
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E865
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=127
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=250 y1=119 x2=334 y2=120
# PICT resource ID: 11
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=15 y1=157 x2=227 y2=173
# text: ""
# item 10: TEXT (0x88) disabled
# bounds: x1=15 y1=136 x2=227 y2=152
# text: "Save as:"
# item 11: CUSTOM (0x80) disabled
# bounds: x1=252 y1=88 x2=332 y2=108
# data: ""
# item 12: BUTTON (0x04) enabled
# bounds: x1=252 y1=192 x2=332 y2=212
# text: "Save all"
DITL_201.txt
# 9 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=218 y1=132 x2=288 y2=150
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=218 y1=184 x2=288 y2=202
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=14 y1=136 x2=197 y2=152
# text: "Save as:"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=200 y1=29 x2=302 y2=49
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=218 y1=56 x2=288 y2=74
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=218 y1=82 x2=288 y2=100
# text: "Drive"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=17 y1=157 x2=194 y2=173
# text: ""
# item 7: CUSTOM (0x80) disabled
# bounds: x1=14 y1=29 x2=197 y2=127
# data: ""
# item 8: BUTTON (0x04) enabled
# bounds: x1=218 y1=159 x2=288 y2=177
# text: "Save all"
DITL_202.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=8 y1=296 x2=88 y2=316
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=105 x2=332 y2=125
# text: "Done"
# item 2: BUTTON (0x04) enabled
# bounds: x1=252 y1=161 x2=332 y2=181
# text: "Add All ‚åòA"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=207
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: BUTTON (0x04) enabled
# bounds: x1=252 y1=133 x2=332 y2=153
# text: "Open"
# item 10: BUTTON (0x04) enabled
# bounds: x1=252 y1=189 x2=332 y2=209
# text: "Add ‚åòG"
# item 11: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=3 y1=216 x2=173 y2=234
# text: "Rename before adding"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=179 y1=216 x2=334 y2=234
# text: "Delete after zipping"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=3 y1=239 x2=221 y2=257
# text: "Add files modified on or after:"
# item 15: CUSTOM (0x80) disabled
# bounds: x1=224 y1=236 x2=330 y2=257
# data: ""
DITL_203.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=168 y1=296 x2=248 y2=314
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=59 y1=1152 x2=77 y2=1232
# text: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=256 y1=163 x2=336 y2=181
# text: "Done"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=232 y1=39 x2=347 y2=59
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=256 y1=68 x2=336 y2=86
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=256 y1=93 x2=336 y2=111
# text: "Drive"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=39 x2=230 y2=233
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=229 y1=39 x2=246 y2=233
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=252 y1=124 x2=340 y2=125
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=20 y1=1044 x2=116 y2=1145
# text: ""
# item 10: BUTTON (0x04) enabled
# bounds: x1=256 y1=188 x2=336 y2=206
# text: "Add ‚åòG"
# item 11: BUTTON (0x04) enabled
# bounds: x1=256 y1=213 x2=336 y2=231
# text: "Add All ‚åòA"
# item 12: BUTTON (0x04) enabled
# bounds: x1=256 y1=138 x2=336 y2=156
# text: "Open"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=7 y1=240 x2=177 y2=258
# text: "Rename before adding"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=183 y1=240 x2=338 y2=258
# text: "Delete after zipping"
# item 15: CUSTOM (0x80) disabled
# bounds: x1=232 y1=260 x2=338 y2=281
# data: ""
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=7 y1=263 x2=225 y2=281
# text: "Add files modified on or after:"
DITL_204.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=253 y1=157 x2=333 y2=177
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=253 y1=126 x2=333 y2=146
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E865
# item 3: CUSTOM (0x00) enabled
# bounds: x1=236 y1=30 x2=338 y2=46
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=253 y1=54 x2=333 y2=74
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=253 y1=82 x2=333 y2=102
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=13 y1=51 x2=231 y2=181
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=13 y1=28 x2=231 y2=47
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=252 y1=113 x2=334 y2=114
# PICT resource ID: 11
# item 9: BUTTON (0x04) enabled
# bounds: x1=24 y1=189 x2=211 y2=209
# text: ""
# item 10: TEXT (0x88) disabled
# bounds: x1=15 y1=6 x2=350 y2=23
# text: "Please find the ZipIt Plugins folder:"
DITL_205.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=14 y1=189 x2=162 y2=206
# text: "Show possible files"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=14 y1=168 x2=154 y2=186
# text: "Look inside files"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=189 x2=286 y2=207
# text: "Show all files"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=168 x2=340 y2=186
# text: "Show only “.zip” files"
# item 12: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
DITL_206.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=138 x2=336 y2=156
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=59 y1=1152 x2=77 y2=1232
# text: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=256 y1=163 x2=336 y2=181
# text: "Cancel"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=232 y1=37 x2=347 y2=59
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=256 y1=68 x2=336 y2=86
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=256 y1=93 x2=336 y2=111
# text: "Drive"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=37 x2=230 y2=185
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=229 y1=37 x2=246 y2=185
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=252 y1=124 x2=340 y2=125
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=20 y1=1044 x2=116 y2=1145
# text: ""
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=14 y1=217 x2=162 y2=234
# text: "Show possible files"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=14 y1=196 x2=154 y2=214
# text: "Look inside files"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=217 x2=286 y2=235
# text: "Show all files"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=196 x2=340 y2=214
# text: "Show only “.zip” files"
DITL_207.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=247 y1=157 x2=327 y2=177
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=247 y1=126 x2=327 y2=146
# text: "Cancel"
# item 2: PICTURE (0xC0) disabled
# bounds: x1=246 y1=113 x2=328 y2=114
# PICT resource ID: 11
# item 3: CUSTOM (0x00) enabled
# bounds: x1=230 y1=30 x2=332 y2=46
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=247 y1=54 x2=327 y2=74
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=247 y1=82 x2=327 y2=102
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=7 y1=51 x2=225 y2=181
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=7 y1=28 x2=225 y2=47
# data: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=7 y1=7 x2=326 y2=23
# text: "^0"
# item 9: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
DITL_208.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=254 y1=151 x2=334 y2=169
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=57 y1=1165 x2=75 y2=1245
# text: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=254 y1=176 x2=334 y2=194
# text: "Cancel"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=230 y1=50 x2=345 y2=72
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=254 y1=81 x2=334 y2=99
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=254 y1=106 x2=334 y2=124
# text: "Drive"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=50 x2=228 y2=198
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=227 y1=50 x2=244 y2=198
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=250 y1=137 x2=338 y2=138
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=18 y1=1057 x2=114 y2=1158
# text: ""
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=12 y1=230 x2=160 y2=247
# text: "Show possible files"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=12 y1=209 x2=152 y2=227
# text: "Look inside files"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=173 y1=230 x2=284 y2=248
# text: "Show all files"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=173 y1=209 x2=338 y2=227
# text: "Show only “.zip” files"
# item 14: TEXT (0x88) disabled
# bounds: x1=14 y1=7 x2=339 y2=23
# text: "^0"
DITL_209.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=247 y1=157 x2=327 y2=177
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=247 y1=126 x2=327 y2=146
# text: "Cancel"
# item 2: PICTURE (0xC0) disabled
# bounds: x1=246 y1=113 x2=328 y2=114
# PICT resource ID: 11
# item 3: CUSTOM (0x00) enabled
# bounds: x1=230 y1=30 x2=332 y2=46
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=247 y1=54 x2=327 y2=74
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=247 y1=82 x2=327 y2=102
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=7 y1=51 x2=225 y2=181
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=7 y1=28 x2=225 y2=47
# data: ""
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=9 y1=211 x2=157 y2=228
# text: "Show possible files"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=9 y1=190 x2=149 y2=208
# text: "Look inside files"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=170 y1=211 x2=281 y2=229
# text: "Show all files"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=170 y1=190 x2=335 y2=208
# text: "Show only “.zip” files"
# item 12: TEXT (0x88) disabled
# bounds: x1=7 y1=7 x2=326 y2=23
# text: "^0"
# item 13: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
DITL_210.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=161 x2=332 y2=181
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=130 x2=332 y2=150
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E865
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=127
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=250 y1=119 x2=334 y2=120
# PICT resource ID: 11
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=15 y1=157 x2=227 y2=173
# text: ""
# item 10: TEXT (0x88) disabled
# bounds: x1=15 y1=136 x2=227 y2=152
# text: "Save as:"
# item 11: CUSTOM (0x80) disabled
# bounds: x1=252 y1=88 x2=332 y2=108
# data: ""
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=90 y1=200 x2=139 y2=218
# text: "Mac"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=200 x2=189 y2=217
# text: "PC"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=20 y1=200 x2=78 y2=217
# text: "None"
# item 15: TEXT (0x88) disabled
# bounds: x1=10 y1=180 x2=211 y2=195
# text: "Self-extracting archive:"
DITL_1000.txt
# 31 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=250 x2=344 y2=270
# text: "Print…"
# item 1: BUTTON (0x04) enabled
# bounds: x1=155 y1=250 x2=213 y2=270
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=5 x2=461 y2=20
# text: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=25 x2=461 y2=40
# text: ""
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=45 x2=461 y2=60
# text: ""
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=65 x2=280 y2=80
# text: ""
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=375 y1=65 x2=461 y2=80
# text: ""
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=85 x2=280 y2=100
# text: ""
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=375 y1=85 x2=461 y2=100
# text: ""
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=105 x2=280 y2=120
# text: ""
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=316 y1=105 x2=461 y2=120
# text: ""
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=125 x2=461 y2=140
# text: ""
# item 12: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=160 x2=461 y2=175
# text: ""
# item 13: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=180 x2=461 y2=195
# text: ""
# item 14: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=200 x2=461 y2=215
# text: ""
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=220 x2=461 y2=235
# text: ""
# item 16: TEXT (0x88) disabled
# bounds: x1=95 y1=5 x2=128 y2=20
# text: "Name:"
# item 17: TEXT (0x88) disabled
# bounds: x1=60 y1=25 x2=127 y2=40
# text: "Organization:"
# item 18: TEXT (0x88) disabled
# bounds: x1=84 y1=45 x2=128 y2=60
# text: "Address:"
# item 19: TEXT (0x88) disabled
# bounds: x1=100 y1=65 x2=128 y2=80
# text: "City:"
# item 20: TEXT (0x88) disabled
# bounds: x1=45 y1=85 x2=129 y2=101
# text: "Zip/Postal Code:"
# item 21: TEXT (0x88) disabled
# bounds: x1=92 y1=105 x2=129 y2=121
# text: "Phone:"
# item 22: TEXT (0x88) disabled
# bounds: x1=10 y1=142 x2=131 y2=159
# text: "Email addresses:"
# item 23: TEXT (0x88) disabled
# bounds: x1=325 y1=85 x2=369 y2=101
# text: "Country:"
# item 24: TEXT (0x88) disabled
# bounds: x1=288 y1=105 x2=312 y2=121
# text: "Fax:"
# item 25: TEXT (0x88) disabled
# bounds: x1=7 y1=125 x2=130 y2=142
# text: "Where did you get ZipIt?"
# item 26: TEXT (0x88) disabled
# bounds: x1=290 y1=65 x2=369 y2=80
# text: "State/Province:"
# item 27: TEXT (0x88) disabled
# bounds: x1=64 y1=160 x2=131 y2=177
# text: "CompuServe:"
# item 28: TEXT (0x88) disabled
# bounds: x1=97 y1=180 x2=132 y2=196
# text: "GEnie:"
# item 29: TEXT (0x88) disabled
# bounds: x1=51 y1=200 x2=130 y2=215
# text: "America Online:"
# item 30: TEXT (0x88) disabled
# bounds: x1=85 y1=220 x2=130 y2=235
# text: "Internet:"
DITL_1001.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=150 x2=505 y2=170
# text: "Save to disk…"
# item 1: BUTTON (0x04) enabled
# bounds: x1=310 y1=150 x2=396 y2=170
# text: "Don’t Send"
# item 2: BUTTON (0x04) enabled
# bounds: x1=70 y1=150 x2=146 y2=170
# text: "Eudora"
# item 3: TEXT (0x88) disabled
# bounds: x1=72 y1=8 x2=493 y2=67
# text: "Thanks! Just one more step. You will receive your password more quickly if you send me your registration information in an email message."
# item 4: TEXT (0x88) disabled
# bounds: x1=70 y1=70 x2=487 y2=118
# text: "If you have Eudora or Outlook Express installed, you can send it automatically. Otherwise, you can click “Save to disk…” and send the resulting file manually to preregistration@maczipit.com."
# item 5: TEXT (0x88) disabled
# bounds: x1=70 y1=120 x2=368 y2=144
# text: "Which email client do you use?"
# item 6: BUTTON (0x04) enabled
# bounds: x1=170 y1=150 x2=281 y2=170
# text: "Outlook Express"
DITL_1002.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=288 y1=144 x2=346 y2=164
# text: "Save…"
# item 1: BUTTON (0x04) enabled
# bounds: x1=72 y1=144 x2=158 y2=164
# text: "Don’t Save"
# item 2: TEXT (0x88) disabled
# bounds: x1=72 y1=8 x2=380 y2=78
# text: "Thanks! Just one more step. You will receive your password more quickly if you send me your registration information in an email message."
# item 3: TEXT (0x88) disabled
# bounds: x1=72 y1=80 x2=381 y2=133
# text: "Click “Save…” to save a text file to your hard disk that you can then email to zipit@softlock.com."